• Home
  • Services
    • Commercial Pool Service
    • Saltwater Pool Service/Cleaning
    • Swimming Pool Service
    • Pool Repair
    • Chemical Service
    • Pool Maintenance
  • About
  • Contact
  • Blog
San Antonio Pool Cleaning Pros
  • Home
  • Services
    • Commercial Pool Service
    • Saltwater Pool Service/Cleaning
    • Swimming Pool Service
    • Pool Repair
    • Chemical Service
    • Pool Maintenance
  • About
  • Contact
  • Blog

san antonio pool cleaning blog

Necessary Pool Cleaning Chemicals

10/27/2020

0 Comments

 
Keeping your pool spotless and clear can be a difficult task, particularly if you don't have the correct chemicals. Have the essential chemicals in stock for regular maintenance and foreseen water issues. Beneath are the pool chemicals that every pool owner should be familiar with to keep their pool healthy and sparkling.

Sanitizers
​
These are the synthetic compounds that you use to keep water cleaned and sterilized. There ought to be a consistent degree of chlorine (or bromine) in the water consistently.

  • TriChlor
 3" tabs, or 1" tabs or sticks. With cyanuric corrosive. Add them to a chlorine floater or installed chlorinator. 
  • DiChlor:
A granular with cyanuric corrosive. The powdered structure acts rapidly to chlorinate pools, fountains, and spas.
  • Bromine
 1" tabs. Incredible for spas. It works better in heated water and can be recovered by shocking. More pH steady also. 
  • Cyanuric Acid
Liquid or dry chlorine stabilizer. Shields chlorine from harm by UV beams. Add small quantities to dichlor and trichlor; include extra if the pool became depleted to keep up 30-50 ppm. Channel some water and top off if CYA levels get a lot higher than 50 ppm.

Oxidizers
Oxidizers are the auxiliary sanitizer, utilized at regular intervals to kill algae and microbes. Chlorine or non-chlorine shocks are in a powdered kind. All you have to do is open the pack and empty it into the pool.

  • Calcium Hypochlorite
The purpose of Cal Hypo pool shock is to rapidly purify pool water, help chlorine levels, and eliminate algae. This oxidizer works best with a low pH level of around 7.2. 

  • Chlorine-Free Shock
Granular potassium monopersulfate (non-chlorine). A quick-acting oxygen-based sanitizer that consumes clean with no buildup, and you can swim just after treatment.

Water Balancers
To keep your water in balance, you should test the pool a few times each week for chlorine and pH levels and alter as needed. Test complete alkalinity at regular intervals or if you experience pH difficulties, and test calcium hardness and cyanuric acid levels each month.

  • pH Increaser -Granular Soda Ash
Increase pH when levels fall underneath 7.2 ppm. 1 lb of pH Up will raise pH around 1-click, from 7.2 to 7.3. 
  • pH Reducer -Granular Sodium Bisulfate, or Dry Acid
Reduce pH when levels transcend 7.6 ppm. It can also bring down complete alkalinity. 1 lb pH down will bring down pH around 3-ticks, from 7.8 to 7.5 in 10000 gallons of pool water.
  • Alkalinity Increaser: Granular Sodium Bicarbonate
Boost total alkalinity when levels fall under 80 ppm.
  • Calcium Hardness Increaser: Granular Calcium Chloride
 Increase Calcium hardness when levels fall under 150 ppm. 

Specialty Chemicals 
Numerous specialty chemicals can prove to be useful when unforeseen issues emerge or to keep your pool look its best! Beneath are some of the chemicals specialization that you might need to know. 

  • Algaecides
Some are copper-based, most are non-metallic polymers. Assists with keeping algae from filling in your pool – use pool shock to eliminate its growth, and algaecides to prevent it from returning.
  • Enzymes 

Enzymes separate oils and different types of non-living natural organic from the water, eliminating rubbish, oils, and scents. 
  • Filter Cleaners 
Filter cleaners clean the sand and cartridge filter components to keep your channel functioning admirably. Eliminates oils, minerals, metals, and other filter obstructing gunk. 
  • Metal Magnets 
Sequestering operators secure the trace metals from the water and keep them in solution to make sure they don't recolor your pool surfaces. 
  • Phosphate Removers 
Phosphates are an essential food hotspot for green growth. Without food, algae can't live for long.

What Chemicals Should You Keep In-Stock? 
As a base, the typical pool will need to keep the following chemicals in-stock – despite whether you utilize a salt chlorinator, you will need these other pool synthetic substances occasionally: 

  • Chlorine tablets and pool shock
  • Pool pH Up as well as pH Down 
  • Test strips or test unit 

Each pool will likewise require different synthetic substances to raise calcium, cyanuric, or alkalinity levels, as a rule once a year. Also, clarifiers, enzymes, algaecides can be a significant help for the general daily routine when all of your other options have been exhausted!

​
0 Comments

The Methods to Make your Pool Water Crystal Clear

10/13/2020

0 Comments

 
Having a pool in your lawn can be a pleasant method to keep cool during the blistering summer months. However, keeping up a swimming pool is additionally tedious work, especially if you need to keep the water clear throughout the season.

 If you disregard your pool, the water can turn overcast, dim, and even green in a rush. In any case, it just makes a couple of steps rehearsed regularly to keep your pool clear and sparkling. By doing so, your swimming pool is consistently prepared for your loved ones when they decide to have fun in your outdoor pool. Beneath are the things that you need to do to make your pool water crystal clear.

Maintain Chemical Levels 
Keeping up legitimate substance levels in your pool is the most significant step in keeping the water utterly clear. The fundamental levels to screen are the chlorine and pH. Chlorine usage eliminates germs and microbes in pool water, so it assumes a significant function in keeping the water clear. 

The pool's pH level quantifies how acidic or basic the water is, impacts how powerful the chlorine is in keeping the water clean. Utilize a water testing unit to quantify the chlorine and pH levels around two times every week – the chlorine should gauge somewhere in the range of 1.0 and 3.0 parts per million, while the pH level should peruse somewhere in the extent of 7.2 and 7.6.

Apply Shock and Algaecide Weekly 
Even if you maintain the right chlorine and pH levels in your pool, the water may require a little boost to keep it clear and sparkling. Each week, you should shock or super-chlorinate your water pool to kill any waiting microorganisms or algae growth that might be developing.

Backwashing
Your pool filter assumes an essential part of keeping the water completely clear since it eliminates dirt and microscopic debris from the water to keep it clean. If you need your channel to stay working appropriately, in any case, you should clean it consistently as well.

This cycle is called backwash and includes the water moving through the framework the other way to wipe out the filter. If your water begins to look shady, it's an ideal opportunity to backwash your filter. You can evade cloudiness, nonetheless, by taking note of your pool's typical gauge, pressure reading, and backwashing at whatever point the weight is 5 to 7 pounds for every square inch over the average reading.

Removing Debris Regularly 
To keep your pool water clear and shimmering, you should eliminate natural materials like leaves, bugs, and different trash. While your filter eliminates littler particles, enormous things may not make it into the framework. On the off chance that they're left to sit in the water, they can separate and leave the pool grimy and overcast. Make a propensity for skimming the pool consistently to eliminate larger debris. Depending on the landscape that encompasses your swimming pool, a few times per day might be adequate. Keep your pool clean and actually enjoy the Texas heat!
0 Comments

The Amount of Time Water Can Sit in a Pool Without Chlorine

10/6/2020

0 Comments

 

Pool Owner Tips

The water can sit in a pool without chlorine for just 24-48 hours. Anything beyond that timeframe can cause the water to become unhealthy.

Pool Without Chlorine
Having a chlorine-free seems like a healthy, chemical-free option in contrast to conventional chlorine sanitizer in pools. It is entirely reasonable that individuals ought to be worried about their wellbeing, and one doesn't need to look too far to consider finding reports featuring chlorine exposure as a possible concern.

But, does having chlorine in the pool have potential danger?

Chlorine in Pool
Chlorine sounds awful and seems like the sort of concoction that you would NOT have any desire to swim in, yet actually, this is a misguided judgment. If chlorine is so dangerous and hurtful and possibly a presentation of danger, why reason does drinking water have chlorine in it? The water that we are drinking has been chlorine-purified for more than 100 years. Salt has chlorine in it, as do numerous types of plastics assembling, like PVC. If it is so risky, why is it in a significant number of the items that we use consistently - the most significant things we ingest, such as water.

The fact is, a pool without chlorine is much more dangerous than the one that has. You cannot go and plunge yourself into a water pool that has no protection whatsoever. 

If the water is left without any chlorine in it for a day or two, then forget about swimming; Unless you don't mind swimming in a pool full of bacteria.

Why Chlorine?
Chlorine has unimaginably significant benefits that are required to keep up a safe and bacteria-free pool. If you begin to look towards other options in contrast to chlorine, it is this rundown that you should know.

Chlorine is one of the most incredible synthetic concoctions that meet the standards of still "safe" in the levels where you are exposed. Without these four characteristics, there is a chance of danger for nasty stuff to develop in the water and conceivably make you sick.

Characteristics of Chlorine
The characteristics of chlorine are considered top-notch in providing a safe and protected swimming environment for people who love to swim in the pool so much. The following are the essences that chlorine possesses:

  • Oxidizer
  • Algaecide
  • Sanitizer
  • It holds a residual value of water

With these qualities, chlorine sanitizes, kills bacterias, and provide a bacteria-safe swimming experience. 

What if I don't want to use chlorine in my pool?
​
If you don't want to use chlorine in your pool, you will then realize the effect after. Your water will not have a disinfectant that can combat and eliminate the bacterias. Without the four characteristics that can only find in chlorine, you are making room for bacterias to roam around your pool water and can cause potential health issues. It is a fact that unpurified water can host a wide range of horrendous, concealed risks. 

Remember that water can only sit in the pool without chlorine for only 24-48 hours. Anything beyond that timeframe, you can expect that the water already has organic contaminants that put your health at risk. If you don't want to use chlorine, find a suitable substitute that can sanitize and disinfect your pool as chlorine does.  
0 Comments

    Archives

    October 2020
    September 2020

    Categories

    All

    RSS Feed

Home

Services

About

Contact

San Antonio Pool Cleaning Pros
​
210-791-8239
Site managed by Underdog Leads
Photo used under Creative Commons from Alan Light
  • Home
  • Services
    • Commercial Pool Service
    • Saltwater Pool Service/Cleaning
    • Swimming Pool Service
    • Pool Repair
    • Chemical Service
    • Pool Maintenance
  • About
  • Contact
  • Blog